Hitek NovaPhone Diagnostics
by Hitek Nova
Free app · iPhone & iPad

Know what
the phone is really worth.

Phone Diagnostics checks the screen, touch, cameras, speakers, microphone, buttons, fingerprint and Face ID, sensors, Wi-Fi and mobile data — one at a time, in a couple of minutes. Green means it works. Red means it does not. Nothing is guessed. When it finishes you get a shareable link to the full result.

Free · no account needed

Recorded on an iPhone
Who makes this app

The same software refurbishers use to grade phones by the thousand

This free app is the phone half of TestPod — the desktop software phone refurbishers, repair shops and wholesale distributors use to read, test, erase, grade and label used phones at volume. If you buy or sell used phones for a living, the app is not the product you want. TestPod is.

4,048,799Device tests run
1,576,322Certified erasures
75Brands handled
2,451Device models
See TestPod →

Free trial · 25 devices · no card

How it works

Three taps, then read the colours

Every test tells you what to do while it runs. You never have to know what a digitizer is.

  1. Install it and open itFree from the App Store. No account, no sign-up, nothing to configure.
  2. Tap a test, or run them allTouch, multi-touch, screen and dead pixels, front and rear camera, video, flash, speaker, microphone, every button, Touch ID and Face ID, proximity, light and motion sensors, compass, GPS, Wi-Fi and mobile data.
  3. Read the resultThe app decides automatically where it can — it plays a tone and listens for it, it takes the photo, it lights the flash. Where only a person can judge, it asks you a plain question.
Green — the part works Red — the part is faulty
The result

A result you can send to the buyer

Finishing the tests gives you more than a screen full of ticks. It gives you a link.

Scan or share

The result lives on the web

The results screen carries a QR code and a share button. Scan it, or send it, and the full result opens in any browser — model, storage, the time it was tested, and every single test that passed or failed.

Selling

Paste it into your listing

Put the link in your ad on any marketplace. The buyer checks the condition themselves before they message you. No arguing, no "I'll test it when I get there".

Something failed

Find somewhere to fix it

If a test comes back red, the app points you at a repair shop near you — with the failure already identified, so you are not describing a symptom at the counter.

Open a real result →

Why bother

Most faults are invisible until you look

Buying used

Check it before you pay

A cracked-free screen tells you nothing about the microphone, the rear camera or the proximity sensor. Run the app in front of the seller — it takes minutes.

Selling used

Prove it works

Show the buyer a full pass instead of arguing about it. Fewer returns, fewer disputes, a better price.

Repair

Find it before you open it

Confirm which part actually failed, and confirm the repair afterwards, without guessing from the symptom.

For shops and refurbishers

Testing one phone is free. Testing a thousand is TestPod.

TestPod runs on the computers you already own — no hardware to buy. It reads the device, runs the diagnostics, erases the data to ADISA AAL Level 3 (certificate ADPC251), prints your label and files a report your buyer can scan. 75 brands and 2,451 models have been through it in real production. It starts at $30 a month, with no contract.